4Pack Car Anti-Rust Chassis Rust Converter Water-Based Primer Metal Rust Remover

Description

2SET Carburetor Carb ATV Motorcycle Cleaning Needle Brushes Dirt Jet Remover US
14.28 USD
15.03 USD
0.59 USD
5%
off
Car Plastic Restorer Plating Refurbishing Agent Coating Polishing Cleaning Tool
8.56 USD
9.01 USD
Free shipping
5%
off
2SET 90PCS Car Carburetor Carb Cleaning Nozzle Washer Jet Cleaning Needle Brush
15.95 USD
16.79 USD
Free shipping
5%
off
100X Bike Car Tire Repair Plugs Tubeless Seal Tire Repair Patch Puncture Repair
13.02 USD
13.71 USD
Free shipping
5%
off
5Pack Auto Plastic Parts Refurbishment Repair Agent Retreading Restore Agent Wax
20.05 USD
21.1 USD
Free shipping
5%
off
Car Ceramic Coating 9H Nano Glass Plating Crystal Polishing Agent Car Care Kit
11.6 USD
12.21 USD
Free shipping
5%
off
100ml Car Windscreen Cleaner Glass Cleaning Oil Film Remover Anti-fogging Agent
10.45 USD
11.0 USD
Free shipping
5%
off
30 Pcs Auto Cleaning Kit Interior Wheel Detailing Tool Drill Brush Cleaner Set
47.37 USD
49.86 USD
Free shipping
5%
off
Features:
*1. CONVERTS EXISTING RUST: Chassis Rust Converter replaces existing rust with a dark and protective polymeric barrier. It transforms rust into an inert coating, sealing out moisture and preventing future rust and corrosion.
*2. PROTECTS IRON AND METAL SURFACES: It revives and protects iron and metal surfaces on automobiles, dumpsters, equipment, railings, etc.
*3. PREVENTS FUTURE CORROSION: This rust treatment prevents future corrosion by locking out moisture from rain and snow. Dries in 20 minutes.
*4. NON-TOXIC, FUME-LESS FORMULA: It is a non-flammable, low VOC, water-based treatment. It is non-toxic and emits no harmful fumes.
*5. NO MORE SCRAPING, SANDBLASTING OR GRINDING: Creare a barrier that’s weather-proof and ready for a fresh coat of paint for your car's chassis. This Chassis Rust Converter will provides more than twice the rust protection.
How to Use:
*1. Surface preparation: Remove large rust and scale particles with a wire brush or sandpaper. Clean the surface thoroughly to remove dirt, dust, and grease.
*2. Application: Shake or stir well before using. Apply two coats using either a brush, roller or pump sprayer allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying a quality paint.
*3. Clean-up: Application equipment should be cleaned immediately with soap and water.
*4. General: Do not apply this product if the surface temperatures are below 50°F. Store in a cool, dry place, protected from freezing or temperatures above 100°F. For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two coats of high-quality oil-based paint. No other primer is required.
Description:
*1. Material: Water-based primer
*2. Net Content: 100ml
Package Includes:
4 x Chassis Rust Converter
4 x Brush